Network IP Digital Video Server - 4 port ID# 515Operation Manual
Connect To ADSL n We suggest that you can use the router to dial up the ADSL, more information please refer to the router Help n If you want to conne
About Internet Securityn Please often change the User ID and Password.n For high Internet Security, we suggest you use the router with the firewall fu
Configuration of Network IP Video Server 4 Ports • After connected to the IP Video Server 4 Port, and the Video Server window will appear. • There are
Camera Control• Quality:To select the image quality and recording mode. 1. Image Quality:Lowest, Low, Medium, High, Highest.2. Recording Mode:motion (
ConfigurationSysteml Camera name:Key in the new name of camera, and select “Change” to summit it.l Camera’s time:You can chose “NTP” or “Input new tim
l Current user list:It lists all current users.User managementMotion Detectl Motion Detect:Select “Enable” to activate the motion detection. And chose
Motion Detection SettingNetworkl IP Assgnment - Manually:Setting IP address / Subnet mask / Default gateay - Automatically by DHCP:When IP
- Dial On Power Up:When you select this function, Network IP Video Server will dial up PPPoE connection automatically after each power up. If you p
DDNS- Select “Enable” or “Disable” to activate the DDNS function or not.- Key in “Username” and “Password” of the DDNS Server.- Key in “Domain Name
Other FunctionsOn the IE Browser, right mouse click on the video to active a pop-up menu. The menu includes “View”, “Splits”, “Rotate”, “Resolution” f
IntroductionThe Network IP Video Server - 4 Port is a Digital Network broadcaster allows you to transmit audio, video as a streaming over the Interne
Image Recording Save Current Picture AsStep 1:Click “Save Current Picture As…” option to save the current image display to the local PC.Step 2:Select
Hardware Conectionn Default:Press this button to .restore the original default parameters.n Reboot (reset):Press this button to restart the Network IP
Software Installation And Operation GuideFirst time to login Network IP Video Server 4 PortStep 1:Please execute the “ipEdit.exe” in the CD, and selec
Step 3:Click on “Start“ → “Run“ and key in ”command“, then press “ENTER”. The MS-DOS window will appear, please key in ” ipconfig “ and then pr
How to Use The Virtual IP AddressIf your network Architecture supports the following figure, you will need to do port and local virtual IP forwarding
Step 2:Setup your firewall or gateway, and assign a Local Virtual IP: 192.168.1.127 and open a port 8888 and 8889 for the IP Video Server 4 Port, the
Click “Tools” → “Internet” → “Options” → “Advanced”, and then the “Internet Options“ window will appear, please remove the Item ”Use Passive FTP
n You need to change the Remote PC to be a real IP address, also can change the IP Video Server to be a real IP Address
Comments to this Manuals